Product Categories
Contact Us

Danyang Huaming Tools Co.,Ltd

Tel: +86-511-86310639

Fax: +86-511-86325159

Mobile: 15850470090

Email: judy@huamingtools.com

Add: Qianxiang Hardware Industrial Park, Houxiang Town, Danyang City, Jiangsu Provice, China

News

Grinding Wheel Cutting And Precautions

Lever should have sufficient strength and rigidity, after loading all the parts to keep the wheel free to lift. Lever shaft should be intact, flexible and reliable, with nuts after gear assembly. When replacing the wheel cutting disc, the power must be switched off. The new installation of the wheel cutting discs, to meet the equipment requirements, shall not be installed with the quality of the cut pieces. Install the installation according to the installation process.Grinding wheel  Replace the grinding wheel after cutting the chip to try to run whether there is a clear vibration to confirm the normal operation before use.Grinding wheel The control box or switch must be intact and grounded. The protective cover of the transmission and the grinding wheel must be safe and reliable, and can block the debris from the grinding wheel. The end of the baffle should be firmly mounted on the shell, the work is strictly prohibited to remove. Manipulate the staff to manipulate the handle for cutting movement, the force should be uniform, smooth, not too much force, so as not to overload the grinding wheel cutting pieces. After use, cut off the power, put it in place.Grinding wheel

Grinding wheel cutting machine, also known as grinding wheel saw, wheel cutting machine for construction, hardware, petrochemical, mechanical metallurgy and water and electricity installation and other departments. Grinding wheel cutting machine can be metal flat tube, square flat steel, I-beam, trough steel, carbon steel, yuan and other materials used to cut the common equipment.Grinding wheel

The use of grinding wheel cutting machine should make the direction of rotation of the wheel as far as possible to avoid the surrounding staff, the material is not allowed to cut into the pedestrian crossing. Engaged in the operation of the operation, the construction staff should wear eye glasses. Manipulate the staff to manipulate the handle for cutting movement, the force should be uniform, smooth, not too much force, so as not to overload the grinding wheel cutting pieces. When replacing the wheel cutting disc, the power must be switched off. The new installation of the wheel cutting discs, to meet the equipment requirements, shall not be installed with the quality of the cut pieces. Install the installation according to the installation process.Grinding wheel